Reconyx Hyperfire Manuel d'instructions télécharger pdf (Page 18)

17 ©RECONYX, Inc.

All of the settings detailed above are available on your Professional Series

Camera Trap. In addition, there are many more set-up options available for

Professional Series cameras by using the Configuration Software.

The Configuration Software saves your specified settings to the memory card.

When you insert the memory card into the camera and then power it ON, the

camera will automatically program itself with your specified settings.

The camera will display “SAVED CONFIG” after the settings have been

successfully saved. The file is then erased from the card and is ready to operate

with the new settings.

NOTE: The camera will remember these settings even when shut off, so you do

not need to reconfigure the camera unless you want to change its

behavior.

If you have configured your camera from your PC and you go into the Change

Setup option using the camera’s menu, it will prompt you with “USING CONFIG”

– your options will be <GO BACK> or <CONTINUE>. If you continue, the

settings previously set from the CONFIG software will be overwritten with the

settings you select on the camera.

NOTE: Your new MapView™ software is fully compatible with older

RECONYX™ RapidFire™ Professional and Silent Image series

cameras.

You can program old and new cameras as well as import, view, tag, and export

image data from all RECONYX™ brand cameras.

TIP: Setting the date and time on the new HyperFire™ Professional cameras is

easier to do right on the camera than it is through the Configuration

software.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Pas de commentaire

Reconyx Hyperfire Manuel d'instructions Page 18